Building green means utilizing all practices that reduce the negative impact of construction to create homes that are healthier and more efficient. At ECOterra DESIGN-BUILD, we strive to minimize waste. We use engineered wood products and recycled low or no VOC materials throughout the construction process in order to provide the most energy-efficient and healthy environment possible.
Building green is not a slogan, it’s a lifestyle that Kaye Marshall, General Contractor, Designer, Project Manager and the driving force behind ECOterra has embraced her entire life. “Coming from a family of engineers, you learn conservation is the primary focus of energy usage”, Marshall says. All of our energy-saving protocols have had rigorous testing and have stood the test of time.
ENERGY MODELING and ANALYSIS
Energy-efficiency and renewable energy are the cornerstone of ECOterra’s homebuilding process. After analyzing how you use energy in your current home, we model and translate that usage into the most energy-efficient home design fitting your lifestyle. Our strategies include the selection of innovative lighting, appliances and heating and cooling modes plus much more to achieve the least environmental impact while creating a home you will cherish at the same time.
Site selection is an extremely important, base element of Green Building. At ECOterra, we strive to minimize our impact on the land and vegetation of the site in order to protect the environment around it. A required EPA Storm Water Pollution Prevention Plan (SWPPP) incorporates silt fencing, a concrete washout and a Rip Rap driveway to minimize erosion, and loss of material from the site.
With high-efficiency boilers (90-97% efficient), in-slab radiant heating is a clean, healthy and efficient way to heat your home. Coupled with a thermal blanket to enhance the hot water radiant heating system, solar thermal panels and a storage tank tied to your heating boiler can be incorporated, eliminating the need for a traditional hot water heater. The solar thermal panels function as a water heating or pre-heating system which reduces the gas needed to operate the boiler.
Drywall works as the interior portion of an air-gap. It is extremely important to caulk or seal duct boots, electrical outlets and any other penetrations in the drywall in order to pass duct-blast tests and blower door tests which determine air leakage in the ducts and in the entire home.
Interior finishes are an integral function of Building Green. Using low or no VOC-emitting finishes makes for a healthier environment. Low or no VOC paints, plaster finish walls, marble countertops and tile walls and floors all minimize VOC’s. The use of “Green” or fast-growing woods like Liptus or Bamboo are additional components of Building Green. These fast-growing woods help greatly in reforestation efforts.
New Mexico has a large number of sunlight days per year and with federal, state and PNM grid-tied incentives, solar photovoltaic systems are working their way into the mainstream. Grid-tied systems can generate between 3,000-20,000 kWh’s per year, reducing dangerous CO2 gases being released into the atmosphere by generating facilities using fossil fuels to run their plants. Coal is the number one fuel used to generate electricity in the world.
LANDSCAPING and WATER CONSERVATION
Protecting our natural resources is the basis for Building Green. Water is by far one of the most important resources in the world today. By designing drainage and ponding around the home, the xeriscaping (or natural landscaping) can thrive using runoff from the roof of the home. In our arid climate the addition of timed low water usage drip systems support the vegetation during dry seasons. The natural desert landscape is a kaleidoscope of colors when given even minimal water.
Read more about ECOterra DESIGN-BUILD: